Skip to main content

Understanding Communication Credits on DoorLoop One, Connect, and Multiply

Communication credits pay for texts and calls on DoorLoop One, Connect, and Multiply. See your balance, set auto top-up, and track every credit.

S
Written by Samuel

Overview

On DoorLoop One, Connect, and Multiply, every text message and phone call you send from DoorLoop uses communication credits. Your plan includes a set number of credits each month. When those are used up, DoorLoop moves on to extra credits and buys more automatically, so your messages to tenants, owners, vendors, and prospects keep going.

This article explains where to find your balance, how many credits each message uses, how auto top-up is charged, which emails you get, and how to see exactly where every credit went.

Note: Credits are always used in this order: included credits first, then extra credits, then an auto top-up.

View Your Credit Balance

  1. Click Settings at the bottom of the main menu.

  2. Under the Company section, click Subscription and Billing.

  3. Find the DoorLoop credits section. The Communications section shows your included and extra credits.

The Communications section shows how many included and extra credits you've used and how many are left.

How Many Credits Each Message Uses

  • Text messages

    • Text message (SMS) you send: 1 to 5 credits, depending on length. Short texts use 1 credit. Longer texts use more, up to 5 credits.

    • Text message (SMS) you receive: Free.

    • Text with a picture or file (MMS): 5 credits, for messages you send and messages you receive.

    • Group chat: 5 credits per message, multiplied by the number of people in the chat. This applies to messages you send and receive.

    • Announcements by text: 1 to 5 credits per message, depending on length, multiplied by the number of recipients.

    • AI replies: 1 to 5 credits per message, depending on length, the same as a text you send yourself.

    • System messages: Free. Automatic DoorLoop notifications don’t use credits.

    Phone calls

    • Calls you make and receive: 2 credits per minute. Part of a minute counts as a full minute, so a 2-minute 10-second call uses 6 credits.

    • Call recording, transcription, and AI call summaries: Included at no extra cost.

Tip: To use fewer credits, keep texts short and avoid attachments when they aren’t needed. A short text uses 1 credit, while a long text or a text with a picture uses 5.

Included Credits and Extra Credits

  • Included credits: Your plan gives you credits for each unit every month: 5 per unit on One, 10 on Connect, and 20 on Multiply. They reset to the full amount on the 1st of every month. Unused included credits don't carry over.

  • Extra credits: When your included credits are used up, messages use extra credits. Extra credits never expire, so any you don't use stay on your account.

Tip: When you add units to your subscription in the middle of a month, the included credits for those units are added right away.

Set Your Auto Top-Up Amount

When your extra credits run out, DoorLoop buys more automatically. Your top-up amount is how much is added each time. It starts at $5, and you can set any whole-dollar amount from $5 to $200.

  1. On the DoorLoop credits section, click Edit top-up amount.

  2. In the Auto top-up amount window, enter the amount or use the arrows to change it. The window shows how many credits that amount buys.

  3. Click Save amount to finish.

Note: The price of a credit depends on your plan:

  • One: 2 cents per credit, so $5 buys 250 credits and a $10 top-up adds 500 credits.

  • Connect and Multiply: 1 cent per credit, so $5 buys 500 credits and a $10 top-up adds 1,000 credits.

DoorLoop checks your balance every 6 hours (12 AM, 6 AM, 12 PM, and 6 PM Eastern time) and tops up as many times as needed to cover what you've used.

Once saved, that amount is added every time your extra credits run out.

Note: Only users who can edit the company subscription see the Edit top-up amount button.

What Happens When Credits Run Low

  1. Low-balance email. When less than 10% of your credits are left, DoorLoop emails your billing email address. The 10% is measured against your balance right after your last monthly refill or top-up. The email shows your credits left, your top-up amount, and a Change top-up amount button. Nothing is charged yet. One email is sent per refill or top-up, and a copy is kept in your Communications log.

  2. Extra credits run out. Your messages keep sending. The DoorLoop credits card shows Your next top-up is on the way, and the top-up is added at the next check, within 6 hours.

  3. Top-up is charged. At the next check, your card on file is charged for the top-up and the credits are added to your extra credits. You get a receipt by email, the same as other DoorLoop charges. For example, a $10 top-up on Connect adds 1,000 credits at 1 cent each.

Note: Between checks, your extra credits can go up to 1,000 credits below zero so messages aren't interrupted. If that limit is reached before the next check, sending pauses and the card shows Sending is paused until the next auto-purchase. Sending starts again once the top-up goes through.

Note: If the charge to your card fails, the card shows Your last automatic top-up failed. Check your payment method. DoorLoop tries again at the next check. To update your card, see Update Your Subscription Payment Method and Billing Details.

Track Your Credit Activity

The Communications credits report lists every credit movement (refills, usage, purchases, and adjustments), each on its own row with the balance after it.

To view the Communications credits report, click Reports on the main menu. Then search and click on the Communications credits report. You can also click View credit activity on the DoorLoop credits card.

In the report:

  • Insights line: Shows Included credits used, Extra credits used, Credit purchases (how many top-ups), and Spent on credit purchases (their total cost).

  • Source: What used the credits, such as Conversation, Announcement, Workflow, Voice, or Message. Click it to open the exact item. For example, click Conversation to open the conversation that used those credits.

  • Paid from: Which balance the credits came from: Included, Extra, or Included + Extra when one message used both.

  • Balance after: Your credit balance after that row.

  • Cost and Invoice: Each top-up shows as a purchase with its cost. In the Invoice column, click View to open the invoice for that charge.

Every credit in the report links back to where it came from, so you can see exactly how your credits were used.


Related Articles

Did this answer your question?